Fishing nets, as well as fishing equipment consisting of fishing nets (such as fishing cages), are consumables. Learning the correct storage methods will extend their life cycle.Fishing Nylon Ropeand Fishing Polyethylene Rope have very low UV resistance. After a long time in the sun, there will be a drop in strength, chalking and other phenomena. Normally, some anti-ultraviolet materials (UV) are added to the production materials of fishing nets, but the wear rate is still high. In addition to the natural loss of the sun, during the use of fishing nets, due to its limited structural strength, it is also prone to damage. Holes. Therefore, in order to improve the use time of fishing nets, it is necessary to learn the storage and compilation methods of fishing nets and fishing cages.
After the fishing nets and cages are used, they should first be cleaned to remove mud and fishy attachments. Secondly, the metal parts that are easy to rust (such as sinks) should be removed to prevent them from rusting the mesh. The metal parts of the fishing cages are usually plated or plastic (sprayed, coated), and should be avoided during use. Then it is the drying net. When drying the net, avoid direct sunlight. When conditions permit, choose a spacious, ventilated, dry place for hanging. It is worth noting that the nets after drying should be avoided on the ground directly, but should be placed on a shelf about half a meter from the ground or placed in a wooden box. The place should be kept ventilated and dry. If it is rainy, the door should be closed to prevent the net from getting wet. At the same time, the fishing net should be prevented from being damaged by rats, insects, etc. during storage, and the work of rodent control and pest control should be done. There should be no other volatile, corrosive chemicals in the place where the nets are stored.